This high-performance brass deep groove ball bearing offers exceptional corrosion resistance and electrical conductivity, ideal for demanding power transmission applications where environmental factors are critical.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 83mm |
| Outside Diameter | 186mm |
| Width | 47mm |
Trusted by engineers across multiple sectors, this brass deep groove ball bearing (SKF 6317-2RS) boasts an 83mm inside diameter, a 186mm outside diameter, and a 47mm width. Crafted from high-quality brass, it provides superior resistance to corrosive environments and excellent electrical conductivity, making it suitable for applications in chemical processing, marine environments, and areas prone to static discharge. Its robust construction ensures reliable performance and extended service life under moderate radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tools, ensuring even pressure. 3. Verify smooth rotation and proper seating before final assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto a misaligned shaft. | Use a proper bearing installation tool and ensure shaft and housing alignment are within tolerance before pressing the bearing. |
| Applying excessive force to the bearing during mounting. | Apply force only to the ring (inner or outer) that is being pressed onto its mating surface. Use a bearing press or induction heater for optimal results. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Chemical Processing Equipment, Marine and Offshore Machinery, Electric Motors with High Conductivity Requirements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||