This robust deep groove ball bearing, crafted from high-grade brass, offers exceptional load capacity and corrosion resistance. Engineered for reliability, it ensures smooth, low-friction operation in demanding industrial power transmission systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 81mm |
| Outside Diameter | 160mm |
| Width | 38mm |
A high-performance industrial component, this brass deep groove ball bearing is precision-manufactured with an inside diameter of 81mm, an outside diameter of 160mm, and a width of 38mm. The inherent properties of brass, including its excellent conductivity and resistance to corrosion, make it ideally suited for applications where exposure to moisture, mild chemicals, or extreme temperatures is a concern. Its deep groove design allows for accommodation of both radial and axial loads, providing robust performance in rigorous operating conditions. This bearing is engineered for longevity and consistent performance in heavy-duty machinery, electric motors, and industrial gearboxes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing bore and shaft thoroughly to remove any debris or lubricant. 2. Apply a thin, even layer of appropriate bearing lubricant to the shaft and inner ring of the bearing. 3. Carefully press the bearing onto the shaft using a bearing press or an appropriately sized sleeve, ensuring it seats squarely and without tilting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to premature bearing fatigue. | Use a calibrated press and follow recommended torque specifications for mounting. |
| Introducing contaminants during handling, compromising bearing cleanliness. | Handle bearings in a clean environment and keep them in their original packaging until installation. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Heavy-duty industrial gearboxes, Electric motor power transmission, Conveyor systems in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||