This brass deep groove ball bearing offers exceptional corrosion resistance and smooth operation. Engineered for high-load capacity and extended service life in diverse industrial power transmission systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 80mm |
| Outside Diameter | 163mm |
| Width | 24mm |
Specified by design engineers worldwide, this brass deep groove ball bearing (80mm ID x 163mm OD x 24mm W) is manufactured from high-quality brass for superior corrosion resistance and excellent thermal conductivity. Its robust construction ensures reliable performance under significant radial and axial loads, making it ideal for applications demanding durability and precision. The inherent properties of brass contribute to reduced friction and heat generation, extending operational life in demanding environments. This bearing is designed to meet stringent industry standards for power transmission components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing and mating shaft/housing with a lint-free cloth and appropriate solvent. 2. Apply a thin, even layer of high-quality bearing grease to the bearing raceways. 3. Carefully press or drive the bearing onto the shaft or into the housing, ensuring it is seated squarely and without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation. | Use a bearing press or a controlled heating/cooling method to ensure even load distribution and prevent brinelling of the raceways. |
| Insufficient lubrication. | Ensure the correct type and quantity of lubricant are used, and that re-lubrication intervals are adhered to based on operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||