This high-performance brass deep groove ball bearing offers exceptional corrosion resistance and electrical insulation. Precisely manufactured to exacting standards, it ensures reliable operation in demanding power transmission applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 79mm |
| Outside Diameter | 67mm |
| Width | 43mm |
Specified by design engineers worldwide, this brass deep groove ball bearing (ID: 79mm, OD: 67mm, Width: 43mm) offers superior performance in corrosive environments due to its inherent material properties. Brass construction provides excellent resistance to many chemicals and moisture, while also offering good electrical insulating characteristics. This makes it an ideal choice for applications where galvanic corrosion or electrical arcing is a concern. Its robust design ensures high radial and axial load carrying capacity, contributing to extended service life and operational reliability in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free from debris. Verify shaft and housing tolerances. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner ring. Avoid striking the outer ring. 3. Install the shaft assembly into the housing, ensuring the outer ring is seated correctly and is not subjected to unintended forces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft installation. | Always apply installation force exclusively to the ring that is being pressed onto its mating component (inner ring to shaft, outer ring to housing). |
| Using excessive force, leading to brinelling or deformation. | Utilize appropriate pressing tools and controlled force application. If resistance is too high, re-inspect tolerances and seating surfaces. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Chemical processing equipment, Food and beverage machinery, Electrical motor applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||