This brass deep groove ball bearing offers exceptional corrosion resistance and smooth operation. Its precise dimensions ensure optimal fit and function in demanding power transmission systems.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 79mm |
| Outside Diameter | 186mm |
| Width | 6mm |
Engineered for reliability and performance, this brass deep groove ball bearing features a 79mm inside diameter, a 186mm outside diameter, and a 6mm width. Constructed from high-quality brass, it provides superior resistance to corrosive environments and exhibits excellent thermal conductivity, making it suitable for applications involving elevated temperatures. The deep groove raceway design accommodates moderate radial and axial loads, ensuring efficient power transfer in machinery such as pumps, conveyors, and industrial equipment where non-magnetic properties are also advantageous.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the bearing bore and shaft thoroughly to remove any contaminants. 2. Gently heat the bearing using an induction heater or oil bath to expand it, or chill the shaft. 3. Carefully press the bearing onto the shaft, ensuring it is seated squarely and fully against the housing shoulder.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft without proper alignment. | Ensure the bearing is precisely aligned with the shaft and use a bearing press or appropriate driver for controlled insertion. |
| Overheating the bearing during heat mounting, leading to material degradation. | Adhere to recommended heating temperatures and durations specific to brass bearings, utilizing induction heaters or controlled oil baths. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Chemical processing equipment, Marine applications, Food and beverage machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||