This precision brass deep groove ball bearing offers superior corrosion resistance and excellent running performance. Engineered for demanding power transmission systems, it ensures reliable operation in challenging environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 75mm |
| Outside Diameter | 148mm |
| Width | 7mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing boasts an inside diameter of 75mm, an outside diameter of 148mm, and a width of 7mm. Constructed from high-quality brass, it exhibits exceptional resistance to corrosive elements and offers a lower coefficient of friction compared to steel alternatives. This material choice makes it ideal for applications involving moisture, chemicals, or where non-magnetic properties are advantageous. The deep groove raceway design accommodates moderate radial and axial loads, providing smooth, low-friction rotation essential for efficient power transmission in machinery, electric motors, and specialized industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing are clean and free of debris. Use appropriate lubrication on shaft and bearing bore. 2. Carefully align the bearing onto the shaft, applying even pressure. Avoid hammering or excessive force. 3. Press the bearing into the housing, again ensuring even pressure and proper alignment. Verify smooth rotation after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during mounting, leading to brinelling or damage to raceways. | Use a bearing press or appropriate induction heater for controlled mounting. Apply force evenly to the ring being pressed. |
| Incorrect lubrication, either insufficient or using incompatible lubricants. | Consult the bearing manufacturer's recommendations for the correct lubricant type and quantity based on operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps, Specialized Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||