Engineered for robust performance, this brass deep groove ball bearing delivers exceptional load-carrying capacity and reduced friction in demanding power transmission systems. Its superior material composition ensures reliable operation under severe conditions.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 73mm |
| Outside Diameter | 185mm |
| Width | 33mm |
Purpose-built for heavy-duty applications, this deep groove ball bearing boasts a precision-machined brass construction, offering inherent corrosion resistance and excellent thermal conductivity. With an inside diameter of 73mm, an outside diameter of 185mm, and a width of 33mm, it's ideal for high-load rotational scenarios in industrial machinery, agricultural equipment, and heavy-duty vehicles. The brass material contributes to its durability and ability to dissipate heat effectively, prolonging service life even under continuous operation and extreme environmental factors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure. 3. Verify smooth rotation and proper seating before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Apply force only to the inner ring when mounting on the shaft to prevent brinelling and damage. |
| Insufficient or excessive lubrication. | Refer to lubrication guidelines for the specific application and ensure the correct type and amount of lubricant are used. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Heavy-duty industrial gearboxes, Agricultural machinery driveshafts, Large-scale conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||