This high-performance brass deep groove ball bearing offers superior corrosion resistance and conductivity. Engineered for smooth, low-friction operation in demanding power transmission systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 70mm |
| Outside Diameter | 61mm |
| Width | 7mm |
Manufactured under strict quality controls, this brass deep groove ball bearing (70mm ID x 61mm OD x 7mm Width) provides exceptional durability and resistance to corrosive environments. The inherent properties of brass offer excellent thermal and electrical conductivity, making it suitable for applications where these factors are critical. Its robust design ensures reliable performance under moderate radial and axial loads, minimizing wear and extending service life in diverse operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing and mating shaft/housing thoroughly. 2. Gently press bearing onto the shaft, ensuring even force distribution, or into the housing. 3. Verify free rotation and absence of binding before full assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage. | Use a proper press or bearing installation tool to apply force only to the ring being fitted (inner ring on shaft, outer ring in housing). |
| Incorrect lubrication, either insufficient or using incompatible lubricants. | Consult the bearing manufacturer's specifications for recommended lubricant type and quantity based on operating speed and temperature. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Pumps, Conveyor Systems, Textile Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||