This brass deep groove ball bearing offers superior corrosion resistance and reliable performance in demanding environments. Engineered for efficient power transmission with precise internal geometry and durable brass construction.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 69mm |
| Outside Diameter | 59mm |
| Width | 42mm |
Precision-manufactured to tight tolerances, this brass deep groove ball bearing (69mm ID x 59mm OD x 42mm width) ensures optimal load distribution and minimal friction. The inherent ductility and non-sparking properties of brass make it suitable for applications where electrical conductivity or hazardous environments are a concern. Its robust design supports high radial and axial loads, providing extended service life and smooth rotational accuracy for continuous operation in machinery, industrial equipment, and power transmission systems. The specific dimensions facilitate integration into established housings and shafts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press or tap the bearing into its designated housing, ensuring it is seated squarely. 3. Verify smooth rotation of the inner ring after installation, checking for any binding or excessive play.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper alignment during installation, leading to uneven load distribution and premature failure. | Utilize a bearing press or a properly sized drift to ensure the bearing is installed perpendicular to the shaft and housing. |
| Using excessive force or impact during installation, which can damage the bearing raceways or cages. | Apply force evenly to the ring that is being pressed, and use appropriate tools designed for bearing installation. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Conveyor Systems, Electric Motors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||