This brass deep groove ball bearing offers exceptional performance in power transmission systems. Its robust brass construction ensures reliable operation and extended service life even in corrosive environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 68mm |
| Outside Diameter | 74mm |
| Width | 33mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing boasts an inside diameter of 68mm, an outside diameter of 74mm, and a width of 33mm. Constructed from high-quality brass, it exhibits excellent corrosion resistance, good electrical conductivity, and non-magnetic properties, making it suitable for specialized industrial environments. The solid brass cage provides enhanced durability and stability, ensuring smooth rotational performance under moderate radial and axial loads. Its design minimizes friction and heat generation, contributing to increased energy efficiency and reduced wear in demanding power transmission applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft using a controlled force or bearing heater, ensuring it seats fully. 3. Mount the housing onto the shaft assembly, aligning it to prevent undue stress on the bearing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft with excessive or uneven force. | Use a bearing press, induction heater, or appropriate sleeve to apply uniform force to the bearing's inner ring during installation. |
| Installing the bearing in a contaminated environment. | Perform installation in a clean room or dust-free area, and keep bearing packaging sealed until just before installation. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||