This brass deep groove ball bearing offers superior corrosion resistance and excellent thermal conductivity. Engineered for reliable, low-friction performance in demanding power transmission systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 66mm |
| Outside Diameter | 42mm |
| Width | 49mm |
Built to exacting engineering tolerances, this deep groove ball bearing features a 66mm inside diameter, 42mm outside diameter, and a 49mm width. Constructed from premium brass, it provides exceptional resistance to corrosive environments and exhibits superior heat dissipation properties compared to steel alternatives. This makes it ideal for applications involving high humidity, chemical exposure, or elevated operating temperatures. Its robust design ensures smooth, efficient operation and extended service life under moderate radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly before installation. 2. Carefully press the bearing onto the shaft or into the housing, ensuring even pressure is applied to the correct race. 3. Verify smooth rotation and proper seating after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing with impact on the wrong race. | Apply installation force only to the ring that is being press-fitted (outer ring for housing fit, inner ring for shaft fit). |
| Installing a dirty bearing. | Handle bearings in a clean environment and avoid contamination. If cleaning is necessary, use a suitable solvent and re-lubricate immediately. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Marine equipment, Chemical processing machinery, Food and beverage processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||