Engineered for superior performance, this brass deep groove ball bearing (58x112x42mm) ensures efficient power transmission. Its robust brass construction provides excellent corrosion resistance and longevity in diverse industrial settings.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 58mm |
| Outside Diameter | 112mm |
| Width | 42mm |
A high-performance industrial component, this deep groove ball bearing is precision-machined from high-grade brass, renowned for its inherent corrosion resistance and excellent machinability. Featuring an inside diameter of 58mm, an outside diameter of 112mm, and a width of 42mm, it is designed for optimal load distribution and reduced friction. The brass material contributes to its ability to withstand moderate loads and operate reliably in environments where moisture or mild chemical exposure is a concern. Its robust construction ensures long service life and consistent operational efficiency in demanding power transmission applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from contaminants. 2. Gently heat the bearing or cool the shaft to facilitate easy mounting, avoiding excessive force. 3. Verify correct seating and alignment before proceeding with the application's operational testing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage. | Utilize proper mounting techniques such as heat or press fitting, and always use appropriate tools that distribute force evenly. |
| Incorrect lubrication, leading to premature wear or seizure. | Consult the lubricant manufacturer's recommendations for the specific operating conditions and re-lubricate at recommended intervals. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||