Engineered for robust power transmission, this brass deep groove ball bearing delivers exceptional durability and smooth operation. Its premium brass construction ensures superior corrosion resistance, making it suitable for challenging environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 63mm |
| Outside Diameter | 30mm |
| Width | 44mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inside diameter of 63mm, an outside diameter of 30mm, and a width of 44mm. Constructed from high-grade brass, it offers excellent inherent lubricity, good corrosion resistance against many chemicals, and non-sparking properties, which are critical in potentially explosive atmospheres. The optimized raceway geometry ensures minimal friction and high load-carrying capacity, making it ideal for applications requiring continuous, reliable rotational movement under moderate to heavy radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft using a suitable press or bearing heater, applying even force to the inner ring. 3. Install the bearing into the housing, again ensuring even force application to the outer ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring when mounting on the shaft. | Always apply force to the inner ring when mounting onto the shaft to prevent damage to the ball raceways. |
| Improper lubrication during installation or operation. | Use a high-quality grease or oil specifically recommended for brass bearings and ensure consistent re-lubrication schedules are maintained. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||