This brass deep groove ball bearing is engineered for superior performance in power transmission systems. Its robust construction and precise dimensions ensure reliable operation and extended service life under demanding conditions.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 63mm |
| Outside Diameter | 136mm |
| Width | 33mm |
Manufactured under strict quality controls, this deep groove ball bearing features a 63mm inside diameter, a 136mm outside diameter, and a 33mm width. Constructed from high-grade brass, it offers exceptional corrosion resistance, making it ideal for environments where moisture or chemical exposure is a concern. The material also contributes to good thermal conductivity and non-sparking properties. Its design allows for high rotational speeds and moderate axial loads in both directions, providing efficient and smooth power transmission.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seating surfaces (shaft and housing) are clean and free from debris. 2. Carefully align the bearing with the shaft and gently press it into place, or use appropriate bearing mounting tools if press-fitting. 3. For housing installation, align the bearing and gently press it into the housing bore, ensuring it is seated squarely.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto a shaft with excessive force, leading to brinelling or cracking. | Use a controlled press or induction heater for proper mounting, applying force evenly to the correct ring. |
| Incorrect lubrication, either insufficient or over-lubrication, impacting performance and lifespan. | Consult the bearing manufacturer's lubrication guidelines for the specific application and operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems, Pump Assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||