This brass deep groove ball bearing, engineered for exceptional performance in power transmission systems, offers superior corrosion resistance and reliable load handling. Its robust construction ensures longevity in diverse operational environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 30mm |
| Outside Diameter | 98mm |
| Width | 23mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 30mm, an outside diameter of 98mm, and a width of 23mm. Constructed from high-grade brass, it exhibits excellent resistance to corrosion and chemical attack, making it suitable for humid or chemically aggressive environments. The bearing's design minimizes friction and heat generation, contributing to efficient power transfer and extended service life under moderate radial and axial loads. Its dimensional accuracy ensures precise alignment and smooth operation in a wide range of machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Apply a thin, even layer of appropriate lubricant to the bearing raceways and shaft. 3. Carefully press the bearing onto the shaft using a controlled force, ensuring it is seated squarely and fully.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or excessive force during installation. | Utilize a proper bearing installer or press with controlled force, avoiding hammering or uneven pressure. |
| Improper lubrication or using the wrong type of lubricant. | Refer to the application's lubrication requirements and ensure the correct type and amount of lubricant is applied. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Pumps, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||