This brass deep groove ball bearing offers superior corrosion resistance and excellent thermal conductivity, making it ideal for harsh industrial applications where reliability and extended service life are paramount.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 61mm |
| Outside Diameter | 27mm |
| Width | 34mm |
Designed for demanding industrial environments, this brass deep groove ball bearing features a robust construction optimized for high radial and axial loads. With an inside diameter of 61mm, an outside diameter of 27mm, and a width of 34mm, its solid brass construction provides excellent resistance to corrosive media and higher operating temperatures compared to standard steel bearings. The inherent lubricity of brass also contributes to reduced friction and wear, ensuring smooth operation and extended operational lifespan in applications such as gearboxes, pumps, and heavy machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner ring. 3. Mount the assembly into the housing, ensuring proper seating and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply pressing force exclusively to the inner ring when mounting the bearing onto the shaft. |
| Improper shaft or housing fit leading to misalignment. | Verify that shaft and housing tolerances are within recommended specifications for a snug but not interference fit, preventing pre-mature wear and failure. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, High-Temperature Pumps, Corrosive Environment Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||