This brass deep groove ball bearing offers exceptional load-bearing capacity and smooth, low-friction rotation. Its robust construction ensures reliable performance in demanding power transmission applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 58mm |
| Outside Diameter | 149mm |
| Width | 24mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 58mm, an outside diameter of 149mm, and a width of 24mm. Constructed from high-grade brass, it provides excellent corrosion resistance, good thermal conductivity, and non-sparking properties, making it ideal for environments where these characteristics are critical. The raceway geometry is precisely engineered to accommodate radial and axial loads, ensuring efficient power transfer with minimal energy loss. This bearing is designed for long service life under continuous operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press or slide the bearing onto the shaft or into the housing, applying even pressure. 3. Verify smooth rotation and proper seating before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation. | Use a proper bearing installation tool or press, and apply force evenly to the inner or outer ring as appropriate. |
| Contaminating the bearing during handling. | Keep the bearing in its original packaging until ready for installation and handle with clean hands or tools. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Gearboxes and Reducers, Electric Motors, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||