Engineered for superior performance, this brass deep groove ball bearing delivers robust power transmission. Its precise dimensions and brass construction ensure optimal load distribution and extended service life in demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 57mm |
| Outside Diameter | 153mm |
| Width | 37mm |
A proven choice for industrial professionals, this deep groove ball bearing features an inside diameter of 57mm, an outside diameter of 153mm, and a width of 37mm. Constructed from high-quality brass, it offers excellent corrosion resistance, good thermal conductivity, and a lower friction coefficient compared to steel alternatives, making it ideal for applications where lubrication is challenging or where non-sparking properties are beneficial. Its design accommodates radial and axial loads, ensuring smooth, efficient operation in rotating machinery, electric motors, and various power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure. 3. Verify free rotation and proper seating before operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting, leading to brinelling or damage. | Use appropriate bearing installation tools and apply force only to the ring that is being fitted to its seat. |
| Insufficient lubrication, causing premature wear. | Ensure the bearing is adequately lubricated according to the manufacturer's recommendations and operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Pumps, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||