Engineered for superior performance, this brass deep groove ball bearing offers exceptional durability and corrosion resistance in demanding power transmission applications. Its robust construction ensures reliable operation and extended service life.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 95mm |
| Outside Diameter | 141mm |
| Width | 21mm |
Trusted by engineers across multiple sectors, this brass deep groove ball bearing (95mm ID x 141mm OD x 21mm Width) is meticulously crafted from high-grade brass. This material selection provides inherent corrosion resistance, making it ideal for environments where moisture or chemical exposure is a concern. The precision-ground raceways and high-quality balls ensure low friction and smooth, efficient operation under moderate radial and axial loads. Its robust design contributes to extended bearing life and consistent performance in critical power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free of contaminants. 2. Carefully press the bearing onto the shaft or into the housing, ensuring even force distribution. 3. Verify proper seating and rotation before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling of the raceways. | Use a proper bearing press or induction heater for controlled installation. Avoid hammering. |
| Incorrect lubrication, leading to premature wear or overheating. | Consult the bearing manufacturer's lubrication chart for the appropriate grease or oil type and quantity. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||