This brass deep groove ball bearing is engineered for demanding power transmission tasks. Its robust construction and corrosion-resistant material ensure reliable performance and extended service life in challenging industrial settings.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 56mm |
| Outside Diameter | 78mm |
| Width | 7mm |
Purpose-built for heavy-duty applications, this deep groove ball bearing boasts a 56mm inner diameter and a 78mm outer diameter, with a compact 7mm width. The solid brass construction offers superior corrosion resistance, making it ideal for environments exposed to moisture, chemicals, or corrosive agents. This material also provides good electrical conductivity and non-sparking properties where needed. Its precision engineering ensures smooth rotational performance and high load-carrying capacity, crucial for continuous operation in machinery such as pumps, conveyors, gearboxes, and industrial fans where reliability under duress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing and mating surfaces thoroughly. 2. Apply a light coating of appropriate lubricant to the shaft and inner ring. 3. Press the bearing onto the shaft or into the housing using a controlled force, ensuring alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to premature bearing failure. | Utilize appropriate press-fit tools and monitor force application; consult manufacturer specifications for acceptable press loads. |
| Using the wrong type of lubricant for the operating environment. | Select a lubricant specified for the bearing's load, speed, temperature, and environmental conditions (e.g., high temperature, wet). |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Pumps, Conveyor Systems, Gearboxes and Reducers, Electric Motors, Material Handling Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||