This brass deep groove ball bearing offers superior corrosion resistance and thermal conductivity. Its robust construction ensures reliable, low-friction operation in demanding power transmission systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 64mm |
| Outside Diameter | 32mm |
| Width | 41mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features a 64mm inside diameter, 32mm outside diameter, and a 41mm width. Constructed from premium brass, it exhibits excellent resistance to corrosive environments and dissipates heat effectively, making it ideal for applications involving moderate to high radial and axial loads. The cage design promotes efficient lubrication and smooth operation, minimizing wear and extending service life. Its dimensional stability ensures consistent performance under varying operational temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing bore and shaft thoroughly before installation. 2. Carefully press the bearing onto the shaft or into the housing, ensuring it is seated squarely. 3. Verify free rotation of the bearing after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation, leading to brinelling. | Use a proper bearing press or induction heater for controlled installation and avoid hammering. |
| Insufficient or incorrect lubrication. | Consult the bearing manufacturer's lubrication guidelines for the specific application and operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||