This brass deep groove ball bearing offers exceptional performance in power transmission systems. Its robust construction ensures low friction and reliable operation, making it ideal for demanding industrial applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 55mm |
| Outside Diameter | 67mm |
| Width | 5mm |
Specified by design engineers worldwide, this deep groove ball bearing is precision-manufactured from high-grade brass, offering excellent corrosion resistance and good thermal conductivity. With an inside diameter of 55mm, an outside diameter of 67mm, and a width of 5mm, it provides a compact yet robust solution for moderate radial and axial loads. The inherent properties of brass make it suitable for environments where non-magnetic characteristics or electrical insulation are advantageous, ensuring smooth and efficient operation in various power transmission setups.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling, applying even pressure. 3. Verify smooth rotation and absence of binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting, potentially damaging the races or cage. | Use a bearing installer kit or a controlled hydraulic press, ensuring force is applied to the correct race. |
| Installing in a contaminated environment, leading to premature wear. | Maintain a clean workspace and handle bearings with clean, lint-free gloves. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||