This brass deep groove ball bearing offers superior corrosion resistance and smooth operation for critical power transmission applications. Engineered for reliability in challenging industrial conditions.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 55mm |
| Outside Diameter | 41mm |
| Width | 8mm |
Designed for demanding industrial environments, this deep groove ball bearing features a 55mm inside diameter, a 41mm outside diameter, and an 8mm width. Constructed from high-quality brass, it exhibits exceptional resistance to corrosive agents and provides consistent, low-friction performance under moderate loads. The single-row design with a deep raceway allows for axial loads in both directions, making it suitable for a wide array of power transmission systems, including gearboxes, conveyor systems, and general machinery where environmental factors necessitate non-ferrous materials.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Apply a thin layer of appropriate lubricant to the bearing raceways and shaft. 3. Gently press the bearing onto the shaft or into the housing, applying even pressure to the outer or inner ring respectively, avoiding impact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force directly to the bearing cage during installation. | Apply installation force only to the inner ring when mounting on a shaft, or to the outer ring when pressing into a housing. |
| Failing to clean the bearing seat and shaft thoroughly before installation. | Thoroughly clean all mating surfaces to prevent contamination and ensure proper fit, which can lead to premature wear. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Gearboxes and Reducers, Conveyor Systems, Industrial Pumps and Fans.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||