This brass deep groove ball bearing provides superior corrosion resistance and thermal conductivity, making it ideal for environments where traditional steel bearings may fail. Its precise dimensions ensure smooth operation and long service life in critical power transmission systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 55mm |
| Outside Diameter | 103mm |
| Width | 17mm |
Engineered for reliability and performance, this deep groove ball bearing is constructed from high-grade brass, offering exceptional resistance to corrosive environments and excellent electrical conductivity. With an inside diameter of 55mm, an outside diameter of 103mm, and a width of 17mm, it is designed for precise load distribution and minimal friction. The brass material contributes to its ability to operate effectively in applications involving moderate temperatures and where non-sparking properties are beneficial. Its robust design ensures consistent performance and extended operational life under demanding industrial conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully align the bearing with the shaft and housing. 3. Apply a light, even pressure to press the bearing into place, avoiding excessive force or hammering.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to brinelling or damage to raceways. | Utilize a proper bearing press or induction heater for controlled installation, applying force evenly to the bearing's inner or outer ring as appropriate. |
| Contamination of the bearing during handling or installation. | Keep bearings in their original packaging until ready for installation and handle with clean, lint-free gloves. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Pumps, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||