Engineered for demanding power transmission, this brass deep groove ball bearing offers exceptional corrosion resistance and reliable performance in challenging industrial settings.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 48mm |
| Outside Diameter | 35mm |
| Width | 44mm |
A high-performance industrial component, this deep groove ball bearing is precision-machined from solid brass, ensuring superior resistance to corrosive environments and non-magnetic properties. It features an inside diameter of 48mm, an outside diameter of 35mm, and a width of 44mm, providing robust support for rotating shafts. The inherent lubricity of brass contributes to smooth operation and extended service life, making it ideal for applications where traditional steel bearings may degrade. Its construction is optimized for moderate to high radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing bore and shaft are clean and free from debris. 2. Apply a thin, even layer of appropriate lubricant to the shaft and the bearing inner ring. 3. Carefully press the bearing onto the shaft using a hydraulic press or a bearing installer tool, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft without proper lubrication. | Always use a suitable lubricant and a proper installation tool to avoid damaging the bearing races or shaft. |
| Applying pressure to the outer ring during installation on the shaft. | Ensure pressure is applied only to the inner ring when mounting on the shaft to prevent brinelling and premature wear. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Corrosive environment machinery, Food processing equipment, Marine applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||