This brass deep groove ball bearing delivers exceptional performance and longevity in power transmission systems. Its robust brass construction ensures superior corrosion resistance and electrical conductivity, making it ideal for challenging environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 53mm |
| Outside Diameter | 173mm |
| Width | 13mm |
Engineered for reliability and performance, this brass deep groove ball bearing features an inside diameter of 53mm, an outside diameter of 173mm, and a width of 13mm. The solid brass construction offers excellent resistance to corrosion and chemical attack, while also providing good electrical conductivity, crucial for applications where static discharge is a concern. Its design is optimized for high radial and axial loads, ensuring smooth operation and extended service life in diverse industrial power transmission scenarios, including electric motors, gearboxes, and conveyor systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the shaft and the housing bore thoroughly before installation. 2. Carefully mount the bearing onto the shaft, ensuring it is square and fully seated. 3. Gently press the outer ring of the bearing into the housing bore, applying even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to brinelling or damage to the raceways. | Employ a controlled press or appropriate bearing mounting tool to apply pressure only to the ring being fitted (inner ring on shaft, outer ring in housing). |
| Contaminating the bearing during handling or installation, which can lead to premature wear. | Handle the bearing with clean hands or tools and avoid exposure to dust, dirt, or corrosive substances. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motor Shafts, Gearbox Assemblies, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||