This brass deep groove ball bearing, designed for robust power transmission, offers exceptional corrosion resistance and electrical insulation. Its precise dimensions ensure smooth operation in demanding industrial applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 52mm |
| Outside Diameter | 189mm |
| Width | 28mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing boasts a substantial 52mm inside diameter and an impressive 189mm outside diameter, with a 28mm width. Constructed from high-quality brass, it exhibits excellent corrosion resistance, making it suitable for harsh environments, and provides superior electrical insulation compared to steel bearings. Its deep groove raceway design accommodates both radial and axial loads, ensuring reliable performance in a wide array of power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully align the bearing with the shaft and apply even, moderate force for insertion, avoiding hammering. 3. Secure the bearing using appropriate retaining rings or housings as per system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to the raceways. | Use a bearing press or carefully tap with a soft-faced hammer, ensuring even pressure distribution and proper alignment. |
| Contamination of the bearing during handling or installation. | Keep the bearing in its original packaging until installation and work in a clean environment. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||