Engineered for superior performance and longevity, this brass deep groove ball bearing offers exceptional load-bearing capacity and smooth, low-friction operation, making it ideal for critical power transmission systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 52mm |
| Outside Diameter | 122mm |
| Width | 50mm |
Built to exacting engineering tolerances, this deep groove ball bearing boasts an inside diameter of 52mm, an outside diameter of 122mm, and a width of 50mm. Constructed from high-grade brass, it provides excellent corrosion resistance and heat dissipation properties, crucial for operation in challenging environments. The inherent lubricity of brass reduces friction and wear, contributing to extended service life and improved operational efficiency in applications requiring high radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing bore and shaft are clean and free of debris. 2. Apply a thin, even layer of appropriate lubricant to the shaft and bearing bore. 3. Carefully press the bearing onto the shaft using a controlled force, ensuring alignment to prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper shaft or bore preparation leading to damage. | Thoroughly clean both the shaft and the bearing bore with a suitable solvent before installation. Inspect for any burrs or imperfections. |
| Using excessive force or uneven pressure during mounting. | Utilize a hydraulic press or a bearing induction heater for controlled and even force application. Ensure the bearing is seated squarely. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Heavy machinery power transmission, Industrial gearboxes and reducers, Agricultural equipment drives.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||