This brass deep groove ball bearing offers superior corrosion resistance and reliable performance in demanding power transmission applications. Its robust construction ensures longevity and smooth operation under load.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 51mm |
| Outside Diameter | 24mm |
| Width | 26mm |
A high-performance industrial component, this deep groove ball bearing features an inner diameter of 51mm, an outer diameter of 24mm, and a width of 26mm. Constructed from premium brass, it exhibits excellent ductility, electrical conductivity, and superior resistance to corrosive environments, making it ideal for applications where rust and chemical exposure are concerns. The precise dimensions ensure minimal play and efficient load distribution, contributing to extended operational life and reduced maintenance requirements. This bearing is engineered for smooth rotational movement in a wide range of power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat is clean and free of debris. 2. Apply a thin, uniform layer of appropriate lubricant to the bearing surfaces and shaft. 3. Carefully press the bearing onto the shaft or into its housing, ensuring it is seated squarely and without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation | Use a proper press or sleeve to apply even pressure, avoiding direct impact on the bearing races. |
| Inadequate or incorrect lubrication | Consult the lubricant manufacturer's recommendations for the specific application and operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||