This brass deep groove ball bearing offers superior corrosion resistance and excellent electrical conductivity, ideal for harsh industrial power transmission systems. Its precision design ensures smooth operation and extended service life.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 50mm |
| Outside Diameter | 57mm |
| Width | 18mm |
Designed for demanding industrial environments, this deep groove ball bearing features a robust brass construction, providing enhanced resistance to corrosion and chemical attack, crucial in many power transmission applications. With an inside diameter of 50mm, outside diameter of 57mm, and a width of 18mm, it offers a compact yet capable solution. The inherent properties of brass also contribute to good thermal conductivity and non-sparking characteristics, making it suitable for environments where electrical insulation or fire hazards are a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing and mating shaft/housing surfaces are clean and free from debris. 2. Apply a thin, even layer of appropriate lubricant to the bearing raceways and balls. 3. Carefully press the bearing onto the shaft or into the housing, ensuring it seats squarely and without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation without proper alignment. | Use a proper bearing installer or press to ensure the load is applied evenly to the ring being fitted, and verify alignment before applying pressure. |
| Using incorrect or insufficient lubrication. | Consult the bearing manufacturer's specifications or a lubrication guide to select the correct lubricant and apply the recommended amount. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motor Shafts, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||