This premium brass deep groove ball bearing offers exceptional durability and smooth operation. Its robust construction ensures reliable performance in demanding industrial environments, making it a cornerstone for efficient power transmission.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 91mm |
| Outside Diameter | 29mm |
| Width | 47mm |
Engineered for reliability and performance, this brass deep groove ball bearing features a precise 91mm inside diameter, 29mm outside diameter, and 47mm width. The solid brass construction provides superior corrosion resistance, making it ideal for environments exposed to moisture or chemicals. Its low friction coefficient ensures efficient power transfer and extended service life under moderate radial and axial loads. This bearing is suitable for high-speed applications where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft, ensuring it seats fully and squarely. 3. Secure the bearing in the housing using appropriate retaining methods (e.g., circlips, shoulders).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting, leading to brinelling or damage to raceways. | Utilize a bearing press or induction heater for controlled and even force application, ensuring the load is distributed through the bearing ring, not the rolling elements. |
| Inadequate lubrication or using incorrect lubricant type, resulting in premature wear. | Refer to the lubricant compatibility chart for brass bearings and ensure proper initial fill and re-greasing intervals are maintained as per application requirements. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Pumps and Compressors, Material Handling Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||