This premium brass deep groove ball bearing offers exceptional corrosion resistance, making it ideal for demanding environments. Its precise dimensions ensure smooth operation and reliable power transmission in a variety of industrial applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 49mm |
| Outside Diameter | 60mm |
| Width | 10mm |
Engineered for reliability and performance, this brass deep groove ball bearing features an inside diameter of 49mm, an outside diameter of 60mm, and a width of 10mm. Constructed from high-quality brass, it provides superior corrosion resistance, particularly beneficial in humid or chemically aggressive environments where traditional steel bearings might degrade. This material also offers good electrical conductivity. The raceway geometry is optimized for high speed and low friction, ensuring efficient power transmission. Its robust design accommodates both radial and axial loads, making it suitable for a wide range of rotating equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure. 3. Verify smooth rotation and proper seating before operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying impact force directly to the bearing ring during installation. | Use a press or a suitable driver tool that applies force to the ring being fitted. |
| Improper lubrication or using the wrong type of lubricant. | Consult the application requirements and use a lubricant recommended for brass bearings and operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||