This precision-engineered deep groove ball bearing, constructed from high-grade brass, offers superior performance in demanding power transmission systems. Its robust design ensures reliable operation and extended service life.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 47mm |
| Outside Diameter | 97mm |
| Width | 48mm |
A high-performance industrial component, this deep groove ball bearing features an inside diameter of 47mm, an outside diameter of 97mm, and a width of 48mm. The selected brass material provides excellent inherent corrosion resistance, making it suitable for environments where moisture or chemical exposure is a concern. This composition also contributes to its excellent thermal conductivity and non-sparking properties. Designed for radial and axial loads, its internal geometry is optimized for low friction and high rotational speeds, ensuring efficient power transfer and reduced wear in dynamic applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, ensuring even force distribution. 3. Verify smooth rotation and absence of binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling. | Use a proper bearing puller/press and apply force only to the ring being fitted. |
| Incorrect lubrication, leading to premature wear. | Consult the bearing manufacturer's lubrication guidelines for the appropriate grease or oil type and quantity. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||