Engineered for superior performance in power transmission systems, this brass deep groove ball bearing offers exceptional durability and corrosion resistance. Its precise dimensions ensure smooth operation and extended service life in challenging environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 47mm |
| Outside Diameter | 66mm |
| Width | 47mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing boasts an inside diameter of 47mm, an outside diameter of 66mm, and a width of 47mm. Constructed from high-grade brass, it exhibits excellent inherent corrosion resistance, making it suitable for environments exposed to moisture or mild chemicals. The solid brass construction also contributes to good thermal conductivity and reduced risk of flaking. Designed to accommodate both radial and axial loads, it's ideal for applications requiring reliable, low-friction rotational movement in moderate speed and load conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing are clean and free from debris. 2. Apply a thin, even layer of appropriate lubricant to the bearing raceways and rolling elements. 3. Carefully press the bearing onto the shaft or into the housing, ensuring it is seated squarely and without tilting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling of the raceways. | Use a proper bearing press or a controlled hammering method with a soft-faced hammer and an appropriate driver sleeve to apply force evenly. |
| Incorrect lubrication, either insufficient or using an incompatible lubricant type. | Consult the bearing manufacturer's recommendations or the equipment manual for the correct lubricant type and quantity. Re-lubricate at specified intervals. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Conveyor Systems, Electric Motors, Agricultural Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||