This brass deep groove ball bearing offers exceptional performance and durability in power transmission systems. Its robust construction and brass material ensure reliable operation and extended service life in challenging environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 47mm |
| Outside Diameter | 39mm |
| Width | 41mm |
Engineered for reliability and performance, this deep groove ball bearing features an internal diameter of 47mm, an external diameter of 39mm, and a width of 41mm. Constructed from high-grade brass, it exhibits superior corrosion resistance and excellent electrical conductivity, making it ideal for applications where these properties are critical. The precise geometry of the raceways and balls ensures smooth operation, reduced friction, and efficient load distribution, contributing to the longevity and efficiency of the driven machinery. Its robust design withstands moderate radial and axial loads, providing stable support in a wide range of power transmission scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully align the bearing with the shaft and gently press it into place, avoiding excessive force or impact. 3. Verify smooth rotation after installation and secure any associated components as per equipment specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft with a hammer. | Use a proper bearing press or a correctly sized drift to apply even pressure during installation. |
| Incorrect lubrication before initial operation. | Apply the specified lubricant type and quantity as recommended for the application before first use. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motor Shafts, Gearboxes and Transmissions, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||