This brass deep groove ball bearing offers superior corrosion resistance and excellent electrical conductivity. Designed for smooth, low-friction rotation, it's a robust solution for demanding power transmission needs in various industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 47mm |
| Outside Diameter | 31mm |
| Width | 25mm |
Manufactured under strict quality controls, this brass deep groove ball bearing features an inside diameter of 47mm, an outside diameter of 31mm, and a width of 25mm. The solid brass construction provides exceptional resistance to corrosive environments and non-magnetic properties, making it suitable for applications where electrical insulation or non-sparking characteristics are required. Its optimized internal geometry ensures efficient load distribution and extended service life, even under moderate radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surfaces are clean and free from debris. 2. Carefully align the bearing with the shaft and housing, applying even pressure. 3. Secure the bearing using appropriate retaining rings or housings as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning leading to abrasive contamination. | Thoroughly clean the bearing and mounting surfaces with a suitable solvent before installation. |
| Uneven pressure during mounting causing brinelling or deformation. | Use a press or appropriate fixture to apply even force to the bearing's inner or outer ring, depending on the assembly method. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electrical Equipment, Chemical Processing Machinery, Food and Beverage Production.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||