This high-quality brass deep groove ball bearing offers superior corrosion resistance and smooth operation. Precisely engineered for reliable power transmission in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 47mm |
| Outside Diameter | 24mm |
| Width | 13mm |
Manufactured under strict quality controls, this brass deep groove ball bearing features an inner diameter of 47mm, an outer diameter of 24mm, and a width of 13mm. The inherent properties of brass provide excellent resistance to environmental factors and chemical corrosion, making it ideal for applications where standard steel bearings may degrade. Its robust construction ensures consistent load-bearing capacity and reduced friction, contributing to extended operational life and efficient power transfer in machinery. The precision machining of the raceways minimizes vibration and noise during operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat is clean and free from debris. 2. Apply a thin, even layer of appropriate lubricant to the shaft and inner bore of the bearing. 3. Carefully press or gently tap the bearing onto the shaft, ensuring it seats squarely and is fully seated against the housing shoulder.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto a misaligned shaft. | Ensure perfect shaft alignment before applying any pressure. Use a bearing press for controlled and even force application. |
| Over-lubrication or using the wrong type of lubricant. | Refer to the equipment manufacturer's specifications for the correct lubricant type and quantity. Excessive lubricant can cause heat build-up. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motor Shafts, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||