This brass deep groove ball bearing is a precision-engineered solution for power transmission. Its robust brass construction ensures excellent corrosion resistance and reliable performance in various industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 47mm |
| Outside Diameter | 175mm |
| Width | 30mm |
A high-performance industrial component, this deep groove ball bearing features an inside diameter of 47mm, an outside diameter of 175mm, and a width of 30mm. Constructed from high-grade brass, it offers superior corrosion resistance, good thermal conductivity, and inherent lubricity, making it ideal for applications where standard steel bearings may degrade. The design facilitates high rotational speeds and moderate axial loads, ensuring smooth operation and reduced wear in demanding power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing surfaces are clean and free from debris. 2. Carefully align the bearing with the shaft and apply even pressure for insertion. 3. Secure the bearing using appropriate retaining methods, ensuring proper axial and radial clearance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation. | Use a bearing installer or a hydraulic press with appropriate tooling to apply force evenly to the bearing's inner ring. |
| Incorrect shaft or housing fit, causing premature wear or seizure. | Verify shaft and housing tolerances against bearing specifications and ensure a proper interference or clearance fit. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||