This premium brass deep groove ball bearing is engineered for superior performance in high-load power transmission applications. Its robust construction ensures longevity and efficiency.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 45mm |
| Outside Diameter | 189mm |
| Width | 23mm |
A high-performance industrial component, this deep groove ball bearing boasts a precise 45mm inside diameter, a substantial 189mm outside diameter, and a 23mm width. Constructed from high-grade brass, it offers excellent corrosion resistance and electrical conductivity, making it ideal for environments where these properties are critical. The bearing's design minimizes friction and vibration, ensuring smooth rotational movement and extended operational life under demanding loads in electric motors, gearboxes, and heavy-duty machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing seat and shaft thoroughly. 2. Apply a thin layer of appropriate lubricant to the bearing bore and shaft. 3. Carefully press the bearing onto the shaft until it is fully seated against the shoulder.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to brinelling or damage. | Utilize a bearing press or a properly sized induction heater for controlled installation, ensuring force is applied evenly to the inner ring only. |
| Improper lubrication, either insufficient or incorrect type of lubricant. | Consult the bearing manufacturer's specifications for the recommended lubricant type and quantity. Ensure consistent re-lubrication schedules. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||