This brass deep groove ball bearing offers superior corrosion resistance and excellent load-carrying capacity. Engineered for smooth, low-friction operation in demanding power transmission applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 45mm |
| Outside Diameter | 178mm |
| Width | 12mm |
Precision-manufactured to tight tolerances, this brass deep groove ball bearing features an inside diameter of 45mm, an outside diameter of 178mm, and a width of 12mm. The inherent properties of brass provide exceptional resistance to corrosion and chemical attack, making it suitable for aggressive environments where steel bearings would degrade. Its robust construction ensures reliable performance and extended service life under significant radial and axial loads, contributing to efficient power transmission and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean, smooth, and free from debris. 2. Carefully align the bearing with the shaft and housing, applying even pressure during insertion. 3. Secure the bearing using appropriate retaining rings or housing features, ensuring no excessive force is applied.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper alignment during installation leading to premature wear. | Verify shaft and housing concentricity and use a proper alignment tool if necessary. |
| Over-tightening retaining components, distorting the bearing raceways. | Tighten retaining rings or housing fasteners to manufacturer-specified torque values. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Corrosive Chemical Processing Equipment, Marine Propulsion Systems, Food and Beverage Processing Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||