This brass deep groove ball bearing is engineered for exceptional performance in power transmission systems. Its robust construction ensures reliability, smooth operation, and extended service life under demanding industrial conditions.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 42mm |
| Outside Diameter | 136mm |
| Width | 44mm |
A proven choice for industrial professionals, this deep groove ball bearing boasts a 42mm inner diameter, a 136mm outer diameter, and a 44mm width. Constructed from high-quality brass, it offers excellent corrosion resistance and good thermal conductivity, making it suitable for environments where these properties are critical. The inherent characteristics of brass also contribute to reduced friction and noise, ensuring efficient power transmission. Its robust design accommodates radial and axial loads, making it ideal for a wide range of rotational applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press or gently tap the bearing onto the shaft or into the housing, ensuring even pressure. 3. Verify smooth rotation and proper fit before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage. | Use a proper bearing installer or a controlled press. Apply force evenly to the outer ring when mounting in a housing, and to the inner ring when mounting on a shaft. |
| Improper lubrication, leading to premature wear. | Ensure the correct type and amount of lubricant are used according to the manufacturer's recommendations and operating conditions. Re-lubricate at specified intervals. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems, Industrial Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||