Engineered for robust power transmission, this brass deep groove ball bearing offers exceptional corrosion resistance and smooth operation. Its precise dimensions ensure reliable performance in critical machinery.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 73mm |
| Outside Diameter | 56mm |
| Width | 11mm |
Trusted by engineers across multiple sectors, this brass deep groove ball bearing (Inner Diameter: 73mm, Outer Diameter: 56mm, Width: 11mm) is manufactured from premium brass alloys, providing superior resistance to corrosive environments and ensuring excellent electrical conductivity. The inherent lubricity of brass contributes to reduced friction and extended service life under moderate loads. Its design is optimized for high-speed rotational applications, making it suitable for pumps, gearboxes, and general machinery where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring. 3. Verify smooth rotation and proper seating after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the wrong bearing ring during press-fitting. | Always apply force to the inner ring when mounting on the shaft and to the outer ring when mounting in the housing to avoid deforming the raceways. |
| Improper lubrication leading to premature wear. | Use a high-quality grease or oil specifically recommended for ball bearings and ensure the correct amount is applied as per the manufacturer's guidelines. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Pumps, Gearboxes and Speed Reducers, Electric Motors, Material Handling Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||