Engineered for superior performance in power transmission, this brass deep groove ball bearing offers exceptional corrosion resistance and smooth rotational capabilities. Its robust construction ensures reliable operation under moderate loads.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 89mm |
| Outside Diameter | 103mm |
| Width | 25mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing features an 89mm inside diameter, a 103mm outside diameter, and a 25mm width. Constructed from high-quality brass, it exhibits excellent machinability and inherent corrosion resistance, making it ideal for environments where standard steel bearings may degrade. The design facilitates high rotational speeds and moderate radial and axial loads, ensuring efficient power transfer. Its material properties contribute to reduced friction and heat generation, extending operational life in demanding industrial applications such as gearboxes, electric motors, and conveyor systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press or drive the bearing onto its shaft or into its housing, applying even pressure to the correct ring (inner for shaft, outer for housing). 3. Verify the bearing rotates freely and without binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the wrong ring during installation. | Always apply force to the ring that is being pressed onto its mating surface (inner ring for shaft mounting, outer ring for housing mounting). |
| Not properly lubricating the bearing before initial startup. | Ensure the bearing is adequately lubricated according to manufacturer specifications for the intended application before operating. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motor Shafts, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||