This brass deep groove ball bearing offers superior corrosion resistance and non-sparking properties. Designed for high-load, moderate-speed power transmission applications requiring enhanced durability and safety.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 79mm |
| Outside Diameter | 185mm |
| Width | 14mm |
Built to exacting engineering tolerances, this deep groove ball bearing boasts an inside diameter of 79mm and an outside diameter of 185mm, with a precise width of 14mm. Constructed from high-quality brass, it exhibits excellent resistance to corrosive environments and offers inherent non-sparking characteristics, making it ideal for hazardous or explosive atmospheres. Its robust design ensures smooth rotational performance and long service life under significant radial and axial loads, commonly found in industrial machinery, pumps, and material handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even force to the correct ring. 3. Verify free rotation and check for any binding or excessive noise after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press-fit installation. | Always apply pressure to the ring that is being fitted (e.g., inner ring for shaft mounting, outer ring for housing mounting) to avoid damaging the bearing's internal geometry. |
| Insufficient or improper lubrication. | Apply the correct type and amount of lubricant as specified for the operating conditions to ensure optimal performance and bearing life. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Pumps & Compressors, Material Handling Equipment, Hazardous Environment Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||