This brass deep groove ball bearing is engineered for superior performance in power transmission systems. Its robust brass construction offers excellent corrosion resistance and thermal conductivity, ensuring reliable operation under demanding conditions.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 37mm |
| Outside Diameter | 78mm |
| Width | 47mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 37mm, an outside diameter of 78mm, and a width of 47mm. The solid brass construction provides exceptional resistance to corrosion, particularly in humid or chemically aggressive environments. Brass also offers good thermal conductivity, aiding in heat dissipation during high-speed or heavy-load operation. These characteristics make it ideal for applications where standard steel bearings may degrade or fail prematurely, ensuring prolonged operational life and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. Verify dimensions for proper press-fit. 2. Carefully align the bearing with the shaft or housing and apply even pressure during installation, avoiding hammering directly on the bearing races. 3. Once seated, perform a visual inspection for proper alignment and smooth rotation by hand before engaging the power source.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying installation force directly to the bearing rings instead of the housing or shaft. | Use a proper press or driver tool to apply force evenly to the outer ring when mounting into the housing, or the inner ring when mounting onto the shaft. |
| Improper lubrication, leading to premature wear or overheating. | Apply the correct type and amount of lubricant as specified for the operating speed, load, and temperature of the application. Re-lubricate at recommended intervals. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||