Engineered for superior performance, this brass deep groove ball bearing offers exceptional corrosion resistance and electrical conductivity. Its robust construction ensures reliability in demanding power transmission applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 37mm |
| Outside Diameter | 129mm |
| Width | 31mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 37mm, an outside diameter of 129mm, and a width of 31mm. Constructed from high-grade brass, it exhibits excellent resistance to corrosive environments and non-magnetic properties, making it suitable for specialized industrial settings. The material's inherent electrical conductivity is beneficial in applications where static discharge is a concern. Precision-ground raceways and high-quality balls ensure smooth operation and extended service life under moderate radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and free from debris. 2. Carefully align the bearing with the shaft and housing. 3. Apply a consistent, even force to press the bearing into place, avoiding any tilting or misalignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto a dirty shaft or housing. | Thoroughly clean both the shaft and housing bores before attempting installation. |
| Applying uneven pressure during installation, leading to misalignment. | Use a proper bearing press or an appropriate-sized sleeve to ensure even pressure is applied to the correct bearing ring. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||