This premium brass deep groove ball bearing delivers exceptional performance in power transmission applications. Its robust construction ensures smooth, low-friction rotation, enhancing efficiency and longevity under demanding operational conditions.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 45mm |
| Outside Diameter | 97mm |
| Width | 6mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inside diameter of 45mm, an outside diameter of 97mm, and a width of 6mm. Constructed from high-grade brass, it offers excellent corrosion resistance and good thermal conductivity, making it ideal for applications involving moderate loads and high speeds. The solid brass cage design provides robust support and separation for the balls, minimizing friction and heat generation. This bearing is engineered for reliable operation in environments where chemical resistance and non-sparking properties are beneficial.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner ring. 3. Gently guide the housing over the outer ring, ensuring alignment before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply force to the inner ring when mounting onto the shaft to prevent brinelling and damage to the raceways. |
| Insufficient lubrication or using incorrect lubricant. | Apply the specified lubricant according to the manufacturer's recommendations and ensure proper initial fill and re-greasing intervals. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||