This brass deep groove ball bearing offers exceptional corrosion resistance and electrical conductivity, making it ideal for challenging industrial environments and power transmission systems.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 50mm |
| Outside Diameter | 76mm |
| Width | 26mm |
A proven choice for industrial professionals, this deep groove ball bearing is constructed from high-grade brass, ensuring superior resistance to corrosive environments and excellent electrical conductivity. With an inside diameter of 50mm, an outside diameter of 76mm, and a width of 26mm, it is precisely engineered for reliable performance in moderate to heavy load applications. The inherent properties of brass make it suitable for environments where non-sparking characteristics or galvanic corrosion mitigation are critical, contributing to extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft using a suitable bearing installer or press, applying even force to the inner ring. 3. Mount the shaft assembly into the housing, ensuring proper seating of the outer ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer ring during shaft mounting. | Always apply force to the inner ring when mounting onto the shaft and to the outer ring when mounting into the housing to avoid damaging the bearing raceways. |
| Using incorrect lubrication for the operating environment. | Consult bearing lubrication charts to select a lubricant compatible with the operating temperature, load, and speed, and to ensure it doesn't compromise the brass material's properties. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors & Generators, Conveyor Systems, Pumps & Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||