Engineered from premium brass, this deep groove ball bearing (35mm ID x 183mm OD x 16mm W) offers superior corrosion resistance and excellent thermal conductivity, ensuring reliable power transmission.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 35mm |
| Outside Diameter | 183mm |
| Width | 16mm |
Manufactured under strict quality controls, this deep groove ball bearing features a precise 35mm inside diameter, a substantial 183mm outside diameter, and a 16mm width. Constructed from high-grade brass, it exhibits exceptional resistance to corrosive environments and efficient heat dissipation, making it ideal for applications requiring stable performance under varying temperature conditions. The material's inherent lubricity contributes to reduced friction and extended service life. This bearing is designed for robust power transmission systems where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Apply a thin, uniform layer of appropriate lubricant to the bearing raceways and the shaft. 3. Carefully press the bearing onto the shaft until it is fully seated, using a controlled force to avoid damaging the bearing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening during mounting, leading to brinelling or reduced internal clearance. | Use a controlled press fit or induction heater for mounting, and verify free rotation after installation. |
| Contamination during installation, introducing abrasive particles into the bearing. | Maintain a clean work environment, use clean tools, and keep the bearing in its original packaging until ready for installation. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||