This brass deep groove ball bearing is engineered for superior performance in power transmission systems. Its robust brass construction ensures durability and excellent corrosion resistance, making it ideal for demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 88mm |
| Outside Diameter | 145mm |
| Width | 48mm |
A high-performance industrial component, this deep groove ball bearing boasts an 88mm inside diameter, a 145mm outside diameter, and a 48mm width. Constructed from high-quality brass, it offers inherent corrosion resistance and good thermal conductivity, suitable for moderate load applications where environmental factors might degrade steel bearings. Its design minimizes friction and supports both radial and axial loads, ensuring efficient power transfer in machinery such as pumps, gearboxes, and conveyor systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring (inner for shaft, outer for housing). 3. Verify smooth rotation and proper seating before resuming operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during installation. | Always apply installation force to the ring that is being fitted to the shaft or housing, never through the balls. |
| Over-greasing or under-greasing the bearing. | Follow manufacturer recommendations for grease type and quantity; typically, bearings are 30-50% filled for optimal performance. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Pumps, Gearboxes, Conveyor Systems, Electric Motors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||